Why is the warning light flashing on my Elite 10 Gauge when my engine is running?Updated an hour ago
The small red light located near the bottom-right corner of the Elite 10 Gauge is a warning indicator. If the light is flashing while the engine is running, it means the gauge reading has reached the programmed High or Low Warning level.
You can adjust the High and Low Warning settings using the buttons on the front of the gauge.
High Warning Setting:
Press and hold the COLOR button for 5 seconds to enter High Warning Setting Mode.
When the needle begins flashing and the warning light is illuminated, the gauge is ready to program the High Warning value.
Press the COLOR button to move the needle clockwise. Press the SET button to move the needle counter-clockwise.
Press and hold either button to move the needle in larger increments.
After 5 seconds without pressing a button, the gauge will return to normal operating mode.
Low Warning Setting:
Press and hold the SET button for 5 seconds to enter Low Warning Setting Mode.
When the needle begins flashing and the warning light is illuminated, the gauge is ready to program the Low Warning value.
Press the COLOR button to move the needle clockwise. Press the SET button to move the needle counter-clockwise.
Press and hold either button to move the needle in larger increments.
After 5 seconds without pressing a button, the gauge will return to normal operating mode.