The most commonly selected gauges for this type of vehicle are 35 PSI Boost Gauge, 1500 Exhaust Temperature Gauge, Transmission Temperature Gauge and 100 PSI Fuel Pressure Gauge. However, Glowshift offers a wide variety of different types and...
The 1992-1997 F-Series pods is a layover style pillar. Here is a link to our installation instructions. For installation, this will require you to fully remove your factory A-pillar trim molding. Once the factory trim is completely removed from...
Unfortunately, due to the body and interior change in 1992, the pods we offer for the 1992-1997 F-Series will not work on the 1987-1991 F-Series application. However, we do offer the triple pillar pod that will fit 1987-1991 F-Series. Click here...
The 1992-1997 F-Series Fuel filter bowl has a pressure port directly on it that is the exact size of our sensors which is ⅛-27 NPT. Since the port is the same thread size, the adapter we sell on our website is not needed at all. The reason we...
The applications have a high-pressure oil pump. GlowShift’s High-Pressure Oil Pressure Gauge is electronically driven and reads your truck’s HPOP from 0 to 4,000 PSI with unrivaled accuracy. Our gauge plugs in directly to the factory OEM HPOP...
The 1992-1997 F-Series pods will work on both the Gasoline and Diesel vehicles as the cabs are the same.
Test Port: This port was designed for transmission companies to test line pressure inside the transmission. Most test ports are the same size as our sensors, but some ports will require a thread adapter. The 1992-1997 F-Series transmission test...
On the 1992-1997 F-Series, there is a port on the Oil Filter housing that can be used to install an Oil Temperature sensor and or an Oil Pressure sensor. This port is the same thread size as our sensors and will not require any thread adapters.
If you would like to install the Glowshift Exhaust Temperature Probe into the up-pipe on a 1992-1997 F-Series you can. We would recommend installing it as close as possible to the exhaust manifold flange to ensure you are provided with an accurate...
When installing a Glowshift Transmission Temperature Sensor into a 1992-1997 F-Series [4R70W], a test port extender is not required. Our sensor is the same thread size as the transmission test port and will thread in with no additional adapters.
Yes, you would have to jack up the vehicle to remove the front passenger wheel. If not the wheel will not come off as the weight of the vehicle is on it.