Do you offer an install video on a 2007-2013 Silverado/Sierra Duramax?
Glowshift does offer an installation video guide on a 2007-2013 Duramax Silverado/Sierra. This video can be found right here!
Glowshift does offer an installation video guide on a 2007-2013 Duramax Silverado/Sierra. This video can be found right here!
The most common selection of gauges for a 2007-20013 Silverado/Sierra Duramax is 60 PSI Boost Pressure, 1500 Exhaust Gas Temperature, Transmission Temperature, 30 PSI Fuel Pressure, and or Rail Pressure. Please Note: Our Fuel Pressure Gauge will...
Yes, on a 2007-2013 Silverado/Sierra Duramax, the only install method for receiving a boost reading is by drilling and tapping the intake manifold.
A Duramax factory fuel system is vacuum-based. The truck relies on a vacuum pull from the tank and not your traditional pump to send fuel to the injection pump. This is the reason many customers will install an aftermarket lift pump to get more...
For a 2007-2013 Silverado/Sierra Duramax, the switches on the back of your gauge should both be in the Down position.
A Snubber Valve is not required for installation on this vehicle. (2007-2013 Chevy Silverado)
In 2009, GM changed the fuse panel in the Silverado/Sierra Duramax trucks. Here is a picture with selected locations for wiring your gauges. We recommend double-checking these locations with a Test light.
Yes, our 2007-2013 Silverado/Sierra Duramax pod will work on the gasoline 2007-2013 Silverado/Sierra, Tahoe, Suburban, Escalade.
At this time, the pillar pod for the 2007-2013 Chevy Silverado is only available in Tan. However, our pods are paintable, just be sure to use ABS plastic paint.
If you have a 2014 Classic truck, the 2007-2013 Silverado/Sierra Duramax pillar pod will work on your application. The 2014 Classic body style is the same body style as the 2007-2013 Silverado/Sierra pick-up.