Do I need a Honda Fuel Pressure Banjo Bolt Adapter?

 Although The Honda Fuel Pressure Banjo Bolt Adapter is not required for installing a fuel pressure gauge on a Honda engine it is suggested as it does make the installation easier. The Honda Banjo Bolt Adapter is specifically designed for the Honda Fuel Filter. This adapter will replace your stock banjo bolt allowing you to easily install your fuel pressure sending unit directly to the fuel filter housing. Also included with this Honda Banjo Bolt is a 1/8-27 NPT Female to Male 90 Degree Elbow that allows a more accessible position for the fuel sensor. The thread size for this banjo bolt is M12 x 1.25" and comes with two 12mm diameter crush washers.

Will Fit the Following Models:

  • 88-91 Honda Civic / CRX All Models
  • 92-95 Honda Civic All Models
  • 96-00 Honda Civic All Models
  • 93-97 Honda Del Sol
  • 92-96 Honda Prelude All Models
  • 00-03 Honda S2000
  • 90-93 Acura Integra All Models
  • 94-01 Acura Integra All Models Including Type-R
  • 91-00 Acura NSX All Models
  • Any Fuel Filter Compatible with M12 x 1.25" Banjo Bolt
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request



Article is closed for comments.