GlowShift Gauges Support

If you need to install your EGT probe post-turbo, GlowShift offers a&#xA0;<a href="https://www.glowshiftdirect.com/exhaust-gas-temperature-bracket-for-version-2-egt-probes/" style="text-decoration:none;">downpipe mounting bracket</a>&#xA0;designed to allow the probe to be installed directly onto the downpipe after the turbocharger. The bracket is available for purchase separately on our website.

If you need to install your EGT probe post-turbo, GlowShift offers a downpipe mounting bracket designed to allow the probe to be installed directly onto the downpipe after the turbocharger. The bracket is available for purchase separately on our webs

How can I install an EGT probe after the turbocharger?

FAQs

General Installation Questions

Do you need to remove the intake manifold when drilling and tapping?

My boost gauge did not come with fittings or a line

What is the Best Boost Gauge installation? Boost bolt vs Drilling intake

How should the ferrule fittings on the boost line be positioned?

What should I do if the color on my gauge keeps resetting after I turn my vehicle off?

My Pressure Gauge stays pegged out and all the wires are properly connected, what is the issue?

How difficult is the installation of the gauges?

What size drill and tap do I need to tap my Manifold?

What adapters do I need to install a Fuel Pressure Gauge in my Chevy Duramax?

What adapters do I need to install a Fuel Pressure Gauge in my Ford Super Duty Powerstroke?

What adapters do I need to install a Fuel Pressure Gauge in my Dodge Ram Cummins Diesel?

Should I use Teflon tape on the threads of the sending units I am installing?

How tight should the ferrule cap be on the boost line fitting?

What will happen if there was damage done during the installation or removal?

What are some suggestions to avoid pinching or kinking the boost hose?

How many Elite 10 Gauges can I have daisy chained together?

My gauge has a Boost Sensor, not a hose. Is the installation still the same?

Why is a small light flashing on my Elite 10 Gauge when my engine is running?

What is the proper way to tap?

I need to extend the wires on my sending unit, what size wire should I use?

What if I cannot find an open firewall?

How much should I tighten the EGT probe fitting?

How do I install my Boost Gauge on my diesel truck?

Is there a particular type of anti seize I should use?

Where can I install my Fuel Pressure Sending Unit?

How deep should my EGT probe be into the manifold?

Where would I install my Transmission Temperature Sensor?

Should my EGT probe be installed before or after the turbo?

Can I reinstall the factory Intake Air Heater Plug at any time?

How accurate will the reading be at my test port location?

How do I install the EGT probe that came with my Exhaust Gas Temperature Gauge?

Should I use Teflon Tape when installing the Banjo Bolt and Snubber Valve?

Is there another fuse I can utilize other than the fuse places mentioned in the instructions?

What is the recommended install location for the EGT probe?

What color is the signal wire on the transmission temperature gauge?

Does the Steel Braided Cable have to be away from direct heat?

Should I use thread sealant, or teflon tape to install the fuel pressure sensor?

Do I have to jack up my vehicle to access the test port location?

Will the sensor wires reach my mounting location?

What is the difference between the 30,000PSI Fuel Rail Pressure and the 30/100PSI Fuel Pressure?

What are the Green, Blue, Brown wires for in my 2/3/4 Gauge Power and sensor wiring kit?

Do I have to use the expandable circuits?

Where is the best place to connect the ground wire?

Can I attach the dimmer wire to the adjustable light dimming settings used for the lighting in the cabin of the vehicle/dash?

I have finished the install, and checked for loose connections and leaks - but the gauges are still not powering on. What should I do?

Where are the best locations to install the screws to secure the pod?

What if the pod is not sitting correctly?

I did not purchase the HPOP Gauge Pigtail Harness, can I still install this gauge on my 7.3L/6.0L Ford Powerstroke?

How do I ensure that there is a good connection on the bullet style connectors for my sensor harness?

What size drill bit is size R?

Where can I find a Size R drill bit?

In section 5 of the installation guide step 2 says “Wrap Teflon Tape around the brass fitting on the back of the boost gauge, then attach the brass fitting using a 13mm wrench” What am I attaching the brass fitting to if it is already attached to...

Why is my gauge only displaying a dim red light?

Why is my gauge button stuck, and how can I change the gauge color?

Troubleshooting

Do you offer a catalog?

Is international shipping available and will there be customs fees?

Who is eligible to become an Glowshift ambassador or receive sponsorship?

What do I need to know to become an authorized Glowshift dealer?

I've received my tracking information but when I try to track my order, no information is available. What is the problem?

What payment options can I use when checking out?

How much will shipping cost?

Can I pick up my order from your location?

When will my order ship and how long will it take?

How long will it take my order to arrive?

Do you offer discounts and how do I apply them to my order?

Will I be charged Sales Tax on my order?

What is the warranty policy on your products?

How long will it take to receive my refund?

How do I set up a return or exchange?

What happens if my package is returned due to being undeliverable as addressed?

Am I responsible for shipping when I need to set up a warranty claim?

ONE YEAR NON-TRANSFERABLE LIMITED WARRANTY AND DISCLAIMER

Can I change, cancel, or correct my order after it's been placed?

What should I do if my order is missing items or I received the wrong items?

What is the policy for a package that is refused?

Do all orders over $50 qualify for Free Shipping?

How do I know if my order is coming FedEx or USPS?

Will my order require a signature upon delivery?

Can I ship to an address that is different than my billing address?

Customer Service & Order Questions

How does the 7-Color Series differ from the Elite 10-Color Series?

Does the gauge include everything needed for installation?

How does an HPOP Gauge differ from a standard Oil Pressure Gauge?

Can I install a fuel pressure gauge on a returnless fuel system?

Is an O2 sensor included with the Air/Fuel Ratio Gauge?

How do I select the gauge color on the 7 Color, Elite 10 Color, 10 Color Digital, or 3-in-1 Series?

Can I turn off the LED backlighting on my gauge while keeping the gauge functional?

How do the Black 7 Color and Tinted 7 Color Gauges differ?

Is a pressure sensor included with the Air Suspension Gauge?

What is the warranty on the Bosch O2 Sensor included with GlowShift’s Wideband Air/Fuel Gauge?

Are GlowShift Tachometers compatible with diesel vehicles?

Does the GlowShift Speedometer display mileage?

Is the Boost Gauge mechanical or electronic?

Should I use a Boost/Vacuum Gauge or a Boost-Only Gauge?

How do I install my EGT probe after the turbo?

Are there any options for installing a boost gauge without drilling and tapping the stock intake manifold?

What does “Complete Replacement” mean for an A-Pillar Pod?

What are GlowShift Gauge Pods made of, and can they be painted?

Does the Triple Pillar Gauge Pod replace my factory A-pillar?

Does GlowShift offer Right-Hand Drive (RHD) Gauge Pods?

Do I need a Snubber Valve or Cummins Fuel Pressure Banjo Bolt Adapter for my diesel application?

What is the Boost T-Fitting Adapter, and which vehicles is it compatible with?

How do I determine which size Expandable Circuit my vehicle requires?

Do I need a Fuel Pressure Adapter for my Chevy/GM Duramax 6.6L?

Is a Fuel Pressure Adapter required for a Ford 7.3L or 6.0L Power Stroke?

What is the 1/8" NPT Drill and Tap Kit used for?

How do I know which Transmission Test Port Extender is right for my vehicle?

What Transmission Line T-Fitting Adapter do I need for my vehicle?

What is a Fuel Line Fuel Pressure T-Fitting Adapter used for?

What is a Water Temperature Sender Attachment used for?

What is an Oil Filter or Oil Cooler Sandwich Adapter, and what is it used for?

How do I wire my gauges if I’m not using the Optional 3-Gauge Wiring Kit?

Can I extend the standard sensor harness instead of using the 18' Sensor Harness?

Product Questions

When do I need a Tachometer Signal Filter or H.E.I. Tachometer Signal Filter for my installation?

My gauge has a white wire instead of a yellow wire. Can I use the white wire in its place?

How do I wire my gauges to the fuse box if my kit did not include an Expandable Circuit?

Do I need to apply Teflon tape to the Fuel Pressure Sensor threads?

Can I install a Boost Gauge without drilling and tapping the factory intake manifold?

Do I need the Air Intake Heater Boost Plug Adapter to install a Boost Gauge?

Should I remove the intake manifold before drilling and tapping it?

Is a Honda Fuel Pressure Banjo Bolt Adapter required to install a Fuel Pressure Gauge?

Is a Chevy LS Engine Fuel Rail Adapter required to install a Fuel Pressure Gauge?

Do I need a Fuel Pressure Big Line Kit to install a Fuel Pressure Gauge?

Is a Boost Bolt Thread Adapter required to install a Boost Gauge?

7 Color Series 2" Diesel Tach Installation Instructions

7 Color Series 3-3/4" On-Dash Diesel Tach Installation Instructions

7 Color Series 45 PSI Boost/Vac Gauge Installation Instructions

7 Color Series Analog E85 Wideband Gauge Installation Instructions

7 Color Series 15 PSI Boost/Vac Gauge Installation Instructions

7 Color Series BAR Boost/Vac Gauge Installation Instructions

7 Color Series 30 PSI Boost/Vac Gauge Installation Instructions

7 Color Series 20 PSI Boost Gauge Installation Instructions

7 Color Series 35 PSI Boost Gauge Installation Instructions

7 Color Series 60 PSI Boost Gauge Installation Instructions

7 Color Series 100 PSI Boost Gauge Installation Instructions

7 Color Series Narrowband Gauge Installation Instructions

7 Color Series Needle Wideband Gauge Installation Instructions

7 Color Series Digital Wideband Gauge Installation Instructions

7 Color Series Dual Digital Wideband Gauge Installation Instructions

7 Color Series Vacuum Gauge Installation Instructions

7 Color Series Oil Pressure Gauge Installation Instructions

7 Color Series BAR Oil Pressure Gauge Installation Instructions

7 Color Series Volt Gauge Installation Instructions

7 Color Series Water Temp Gauge Installation Instructions

7 Color Series Celsius Water Temp Gauge Installation Instructions

7 Color Series Oil Temp Gauge Installation Instructions

7 Color Series Celsius Oil Temp Gauge Installation Instructions

7 Color Series 1500° F EGT Pyrometer Installation Instructions

7 Color Series 2400° F EGT Pyrometer Installation Instructions

7 Color Series 1300° Celsius EGT Gauge Installation Instructions

7 Color Series 3 3/4" Tachometer w/ Shift Light Installation Instructions

7 Color Series 2" Tachometer Installation Instructions

7 Color Series 30 PSI Fuel Pressure Gauge Installation Instructions

7 Color Series 100 PSI Fuel Pressure Gauge Installation Instructions

7 Color Series Trans Temp Gauge Installation Instructions

7 Color Series 200 PSI Air Pressure Gauge Installation Instructions

7 Color Series Dual Digital Air Pressure Gauge Installation Instructions

7 Color Series Dual Needle Air Pressure Gauge Installation Instructions

7 Color Series Nitrous Pressure Gauge Installation Instructions

7 Color Series Fuel Level Gauge Installation Instructions

7 Color Series 3 3/4" In-Dash Tachometer Installation Instructions

7 Color Series 3 3/4" In-Dash Speedometer Installation Instructions

7 Color Series 3 3/4" In-Dash Kilometer Speedometer Installation Instructions

7 Color Series Clock Gauge Installation Instructions

7 Color Series 30,000 PSI Fuel Rail Pressure Gauge Installation Instructions

7 Color Series Dual Intake Temp Gauge Installation Instructions

7 Color Series HPOP Gauge Installation Instructions

7 Color Series Diff Temp Gauge Installation Instructions

7 Color Series 60 PSI Exhaust Pressure Gauge Installation Instructions

7 Color Series 100 PSI Exhaust Pressure Gauge Installation Instructions

7 Color Series 3 3/8" In-Dash Tach Installation Instructions

7 Color Series 3 3/8" In-Dash Diesel Tach Installation Instructions

7 Color Series 3 3/8" In-Dash Speedometer Installation Instructions

7 Color Series 3 3/8" In-Dash GPS Speedometer Installation Instructions

7 Color Gauge Series

MaxTow Double Vision® Fuel Level Gauge Installation Instructions

MaxTow Double Vision® 100 PSI Exhaust Pressure Gauge Installation Instructions

MaxTow Double Vision® 60 PSI Exhaust Pressure Gauge Installation Instructions

MaxTow Double Vision® Ambient Air Temp Gauge Installation Instructions

MaxTow Double Vision® 30 PSI Boost/Vac Gauge Installation Instructions

MaxTow Double Vision® 35 PSI Boost Gauge Installation Instructions

MaxTow Double Vision® 60 PSI Boost Gauge Installation Instructions

MaxTow Double Vision® 100 PSI Boost Gauge Installation Instructions

MaxTow Double Vision® Wideband Gauge Installation Instructions

MaxTow Double Vision® Oil Pressure Gauge Installation Instructions

MaxTow Double Vision® Water Temp Gauge Installation Instructions

MaxTow Double Vision® Oil Temp Gauge Installation Instructions

MaxTow Double Vision® 1500F EGT Gauge Installation Instructions

MaxTow Double Vision® 2200F EGT Gauge Installation Instructions

MaxTow Double Vision® Tachometer Installation Instructions

MaxTow Double Vision® 15 PSI Fuel Pressure Gauge Installation Instructions

MaxTow Double Vision® 30 PSI Fuel Pressure Gauge Installation Instructions

MaxTow Double Vision® 100 PSI Fuel Pressure Gauge Installation Instructions

Double Vision Series

MaxTow Diesel Gauge Series

Product Instructions

How can I install an EGT probe after the turbocharger?Updated 2 hours ago